Pace Pressure Washing Pros

Services provided by Aqua Tech, an independent local company.

Can You Pressure Wash a Metal Roof? A Pace & Milton Guide

Short answer: Not with high pressure. A metal roof in Pace, Milton, East Milton, or Bagdad should get a low-pressure soft wash with a cleaner the panel or paint maker allows, then a gentle rinse, not a driveway-style blast.

Not with high pressure. A metal roof in Pace, Milton, East Milton, or Bagdad should get a low-pressure soft wash with a cleaner the panel or paint maker allows, then a gentle rinse, not a driveway-style blast.

In Santa Rosa County, a metal roof under pines picks up a green or black film, yellow pollen, needles, and sap. The panels can take a wash. The finish, the laps, and the screw washers need care.

Why Metal Roofs Here Turn Green, Black, and Yellow

University of Florida IFAS publication HE887 says Florida is warm and humid, and that algae and mildew can thrive on a house exterior in the heavy seasonal rains. Winter does not dry things out much here. 1991–2020 NOAA normals for the Milton Experiment Station show 4.81 inches of rain in November, 4.61 in December, and 5.89 in January.

The growth needs something to hold on to. DECRA's cleaning bulletin says dust, dirt, and airborne pollutants build up on a roof, and that the dirt is a food source for algae, lichen, mildew, and moss. Sherwin-Williams, which makes factory coatings for metal panels, says dirt and spore deposits in humid areas can let mildew grow. The Florida metal roofing maker Gulf Coast Supply & Manufacturing puts it plainly: warm temperatures and high humidity in the Southeast create a high risk of algae and moss. It adds that lower sloped roofs and roofs under vegetation collect more debris and may need more frequent cleaning.

Many lots in Pace and the neighborhoods we cover for pressure washing in Milton have pines and oaks over the roof. A UF/IFAS Q&A on pollen names oak, pine, and palm as major pollen producers and puts pollen season at January to June. Needles collect in valleys and behind vents. U.S. Steel's technical bulletin says wet piles of leaves and other organic debris keep galvanized and Galvalume steel wet and break down the protective oxide film on the coating. Gulf Coast storms add limbs and leaves on top of that. Sap is its own problem. A homeowner roof-care guide from Metal Panels Inc. lists sap among the trouble spots and says to ask the panel manufacturer which cleaner to use on it.

What High Pressure Does to a Metal Roof

The Metal Roofing Alliance says to try a garden hose attachment first and to never use a power washer. Gulf Coast Supply says to rinse only with low-pressure flow. DECRA caps its stone-coated steel at 500 psi and says the spray is for rinsing, not for removing growth, because force can strip the stone granules. That 500 psi number is DECRA's, for its own roof. Makers differ: Western States Metal Roofing allows a consumer-grade washer with a white or black tip on its panels but not industrial-grade equipment. Read the guide for the roof you have.

Water where it does not belong. Panels overlap so rain runs downhill past each joint. The Lysaght maintenance manual, from BlueScope's roofing brand, says that when flashings and joints are hosed off, care should be taken that debris is not lodged between sheets or under the flashing and that water is not driven into the building. On an exposed-fastener roof, every screw seals with a rubber washer. Keep a stream off the laps and screw heads, and work from the ridge down, the way rain runs.

The finish. Painted panels carry a factory coating, such as the Kynar and SMP finishes Gulf Coast Supply names. Sherwin-Williams says wire brushes and abrasives mechanically abrade its coatings. Bare Galvalume is different again. Gulf Coast Supply says unpainted Galvalume scuffs and burnishes easily, weathers unevenly, and can keep burnish marks no cleaner will remove.

Footing. Gulf Coast Supply warns that wet metal roofs are extremely slippery. It says foot traffic can bend panels and damage the coating, and that anyone who must walk should wear soft rubber soles and stay off the ribs. Do not climb a wet roof to try this.

Cleaners Manufacturers Caution Against

  • Abrasives. The Metal Roofing Alliance says never to use steel wool, wire brushes, scouring powders, paint removers, or thinners on a metal roof.
  • Solvents near washers. Gulf Coast Supply rules out scouring powders and industrial solvents, and says not to let petroleum distillates or citrus-based products touch the rubber washers on exposed-fastener roofs. Many sap and tar removers fall in those groups, so ask before anyone uses one.
  • Strong acids and alkalis on bare metal. U.S. Steel says zinc and aluminum coatings are attacked by acids below pH 4, such as the muriatic acid in some brick and concrete cleaners, and by alkalis above pH 9, such as caustic soda and ammonia.
  • Copper and iron. DECRA says not to use copper- or iron-based products on its roofs. Copper speeds corrosion, and iron leaves rust stains.

Bleach is not a simple yes or no. Gulf Coast Supply publishes a bleach-and-detergent mix for algae and mildew on its painted roofs, and Sherwin-Williams publishes a stronger one for mildew on its fluoropolymer finishes. Both say to test a hidden spot first and rinse well. The recipes differ, so the maker's guide decides the mix.

On warranties, Sherwin-Williams says misusing the cleaners it lists voids the warranty for the surface affected, and Gulf Coast Supply says cleaners or methods it does not recommend may void applicable warranties. That is not a rule that any wash voids every metal roof warranty. Terms differ by panel, paint, and installer. Check the manufacturer's care instructions and your own warranty.

Technician in a red shirt rinsing a brick entry porch with a fan-tip wand, Northwest Florida
A wide fan-tip rinse on a home in Northwest Florida. On a roof, the cleaner does the work and the rinse stays gentle.

How Often to Clean a Metal Roof

Western States Metal Roofing says to do a general cleaning at least once a year, to consider twice a year under heavy tree cover or pollen, and to inspect and clean after severe weather. A lot of roofs in East Milton and Bagdad sit under pines, so ask about the twice-a-year schedule. Gulf Coast Supply says most inspections can be done from the ground: look for debris, visible growth, fasteners backing out, and rust, and look again after a windstorm.

When to Schedule Around Local Weather

Western States suggests a cool, overcast day so the solution does not dry and streak, and says to avoid wet or windy days. Milton's normal highs run 69.8°F in November and 62.7°F in December, so a mild, dry, calm late-fall day is a good fit. The Atlantic hurricane season runs through November 30. If a storm has just come through, clear limbs and check for loose trim before any wash.

A November or December cleaning takes the winter film off before the January-to-June pollen season. Under heavy pines, a second rinse after the pollen is the other half of a twice-a-year plan.

What to Ask a Contractor

  • Roof type. Exposed-fastener panels, standing seam, stone-coated steel, and bare Galvalume each have their own limits. Ask whether they know which one you have.
  • Pressure and tip. Ask what pressure goes on the roof. You want a soft wash and a low-pressure rinse, not a narrow tip aimed at laps or screws.
  • Cleaner. Ask what is in the tank, whether your panel or paint maker allows it, and whether they will test a hidden spot first.
  • Walking. Ask whether anyone needs to be on the roof, and if so, about soft soles and staying off the ribs.
  • Plants and insurance. Ask how shrubs under the eaves will be protected and for proof of liability insurance.

The service is roof cleaning in Pace & Milton, done as a soft wash. Most residential roof cleaning jobs in the Pace and Milton area run $400–$800 depending on roof size, pitch, accessibility, and severity of growth. That is the range on our roof cleaning page, not a price for your roof. For asphalt, read should you pressure wash a shingle roof, and for the method itself, pressure washing versus soft washing a roof. Loose screws, rust spots, and lifted trim are a roofer's question. We clean roofs. We do not repair or install them.

Questions About Pressure Washing a Metal Roof

Can you pressure wash a metal roof?

Not with high pressure. Use a low-pressure soft wash with a cleaner the panel or paint maker allows, then a gentle rinse. The Metal Roofing Alliance says never to use a power washer, and DECRA caps its stone-coated steel at 500 psi.

What should not be used to clean a metal roof?

The Metal Roofing Alliance rules out steel wool, wire brushes, scouring powders, paint removers, and thinners. Gulf Coast Supply says to keep petroleum distillates and citrus-based products off the rubber washers on exposed-fastener roofs. U.S. Steel says strong acids and alkalis attack galvanized and Galvalume coatings.

How often should a metal roof be cleaned in Pace or Milton?

Western States Metal Roofing says at least once a year, and to consider twice a year under heavy tree cover or pollen. It also says to inspect and clean after severe weather.

Does pressure washing void a metal roof warranty?

It depends on the product. Sherwin-Williams says misusing the cleaners it lists voids the warranty for the surface affected, and Gulf Coast Supply says unrecommended cleaners or methods may void warranties. Check the manufacturer's care instructions and your own warranty.

Get a Quote

Call or text (850) 845-9110 or Get a Quote. Tell us the roof is metal, whether the screws show, and send a photo from the ground. We clean roofs in Pace, Milton, East Milton, and Bagdad.

Ready for a Pressure Washing Quote?

Most quotes take less than five minutes over the phone. Prefer to type? Text us a photo of the area for a quote. Real prices, no upselling.

Service by Aqua Tech